[HOWTO]Setting codec-selecting video codec  

[HOWTO]Setting codec-selecting video codec

  1. View Full List
  2. Ohsoft.net

You can change the codec by clicking the codec button in oCam main screen.
 


You will see a list of video containers and video codecs as shown below.

Supported video containers are MP4, MKV, M4V, MOV, WMV, FLV, AVI, TS, VOB.

Supported video codecs include NVIDIA NVENC H.264, Open H.264, MPEG-4, Microsoft MPEG-4 Part 2, MPEG-4, Microsoft MPEG-4 Part 3, Windows Media Video 8 (WMV8), MPEG- 2, MPEG-1, FLV.

Of these, the NVIDIA NVENC H.264 codec has an NVIDIA graphics card and is only supported by graphics cards with certain specifications or higher. Please note that if you select this codec using a graphics card, recording will fail.

The NVIDIA NVENC H.264 codec uses a hardware encoder built into the NVIDIA graphics card so you can record almost no rack when recording games.

In addition to the video codec, the video container also records sound during recording, so the audio codec is also used. Supported audio codecs support AAC, MP3, MP2, WMA, and FLAC.

In addition, it supports GIF. If you select and record a GIF, a GIF file is created instead of being recorded as a video file.


About

This is a blog to share a variety of tips and news associated with OhSoft.

Archives

  1. [HOWTO]oCam main screen configuration and features
  2. [HOWTO]Record your screen
  3. [HOWTO]Record only sound
  4. [HOWTO]Capture screen
  5. [HOWTO]Resizing the recording area
  6. [HOWTO]Setting codec-selecting video codec
  7. [HOWTO]Setting Codec-Selecting Video External Codec (VFW)
  8. [HOWTO]Setting codec-Setting audio quality of audio codec
  9. [HOWTO]Record microphone and system sounds
  10. [HOWTO]Game recording
  11. [HOWTO]Setting up oCam - Record - General tab
  12. [HOWTO]Setting up oCam - Record - Game Tab
  13. [HOWTO]Setting up oCam - Record - Resize
  14. [HOWTO]Setting up oCam - Sound
  15. [HOWTO]Setting up oCam - Capture
  16. [HOWTO]Setting up oCam - Animated GIF
  17. [HOWTO]Setting up oCam - Hotkeys
  18. [HOWTO]Setting Up oCam - Effect - Click Effect
  19. [HOWTO]oCam settings- Effect - Highlight effect
  20. [HOWTO]oCam settings - Effect - Cursor Size
  21. [HOWTO]Setting up oCam-Save
  22. [HOWTO]How to reduce the size of recorded video files during game recording (For NVIDIA codec)
  23. [HOWTO]Setting the frame rate mode - VFR (Variable frame rate) or CFR (Constant frame rate)
  24. [HOWTO]Frequently Asked Questions about Variable frame rate (VFR) and Constant frame rate (CFR)
  25. [HOWTO]How to reset oCam's settings
  26. [Tips]How to record the microphone and computer sound together during recording (Windows Vista, 7, 8, 10)
  27. [Tips]How to record sound when using the USB audio interface
  28. [Tips]Rename files saved when recording, recording, or capturing
  29. [Tips]Installing oCam in a Different Path
  30. [Tips]How to record what you hear while recording
  31. [Tips]Download external codecs
  32. [Tips]How to improve the recording quality and sound quality of oCam
  33. [Tips]How to make recorded video recoverable even if app is forcibly terminated during recording
  34. [Tips]Using the x264vfw External Codec
  35. [Tips]Lossless recording-using x264vfw
  36. [Tips]Nox App (Android Player) Solution for the rack that occurs badly when recording a game
  37. [Tips]To use an external codec - Xvid codec
  38. [Tips]Adding a watermark
  39. [Tips]Tips for adjusting to elaborate the recording area window
  40. [Tips]To move the recording area when you recording
  41. [Tips]To set the image quality at the time of recording (from high quality to low quality)
  42. [Tips]In Windows 7 and later, useful tips during microphone recording
  43. [Tips]Way to record the sound of the microphone and the computer together at the time of recording (of Windows Vista, 7,8)
  44. [FAQ]g_pDSCapture-> CreateCaptureBuffer (hr = 0x88780064) error appears (Windows XP)
  45. [FAQ]When you start recording, Error message appears Failed to initialize sound library. Check the Windows Audio service is running.
  46. [FAQ]If you get an error 'The endpoint device is already in use' at the start of recording
  47. [FAQ]If sound comes from only one speaker when recording microphone
  48. [FAQ]If you get an error when installing oCam
  49. [FAQ]Recording does not start with error message 'Failed to url_fopen'
  50. [FAQ]Error appears when recording starts 'Failed to av_image_alloc'
  51. [FAQ]Automatic shutdown after a few seconds after running oCam
  52. [FAQ]7 Days to die Game can't recognize game recording (AntiCheat related)
  53. [FAQ]Game bounces immediately after starting Minecraft recording with oCam (Nvidia graphics card)
  54. [FAQ]The sound becomes loud or torn when playing back the recorded video on the daum pot player
  55. [FAQ]Workaround for voice sync when editing in Adobe Premiere
  56. [FAQ]'Failed to get path of 64-bit Common Files directory' Error when installing oCam
  57. [FAQ]Error while writing video frame (error = -28)
  58. [FAQ]Please do not install absolutely portable version.
  59. [FAQ]What is a digital container format and codec?
  60. [FAQ]Container format and video codecs that are support?
  61. [FAQ]System is slow at the time of recording.
  62. [FAQ]Please let me disable the deep screen function when avast vaccine has been installed.
  63. [FAQ]Can I save to mp3 only the sound of the computer system?
  64. [FAQ]When you are recording, and how to ensure that does not contain the main window
  65. [FAQ]WASRecord: pAudioClient->Initialize failed. (hr=0x80070005) Error
  66. [FAQ]'is dangerous, so Chrome has blocked it.' Google Chrome Not Downloading Files
  67. [FAQ]Cause: Failed to avio_open (error=-13)

Program

  1. oCam
  2. VirtualDVD
  3. CoffeeZip
  4. SecretFolder
  5. CapturePlus

OhSoft Blog - OhSoft.net.

Back to top


Additional tips

[HOWTO]Resizing the recording area

In the main screen of oCam, there is a button called Resize.

A popup menu will appear as shown below.

 


The yellow highlighted area in the pop-up menu indicates the resolution of the recording area, and clicking on the menu item will change the size of the recording area to the selected resolution.

 


The maximum resolution supported is 4k by default, and up to 8k for MPEG-4 codec only.

If you click the full screen menu item, the recording area is set to the entire screen. If you start recording in this state, the entire screen is recorded.

The Find Recording Window menu item displays the window indicated by the mouse pointer as a red rectangle box when clicked. If clicked, the area of ​​the window indicated by the mouse pointer is designated as the recording area.

Find Record Destination window is useful when you want to record or capture only a specific window.

Custom size menu item can be clicked and user can input the size of recording area by number as follows.


Back to top